BREXIT and supply chains?

This is a question we are asked a lot, mainly because our main block supplier, Xella is a German manufacturer. However, the you bear in mind that over 50% of ALL UK construction materials are imported anyway, any issues relating to BREXIT affect the whole industry. We of course factor in manufacture and delivery into our standard leads [...]

By |2021-04-14T11:29:22+00:00April 14th, 2021||

Can you cope with restricted access on site?

All our MFS i-Form Solution® platforms and blocks are delivered on palettes by lorry. Like a flat-packed building or Lego set. All we need is a tower crane to unload and place them into position on site. We then use our mini-cranes to manoeuvre the elements into position. So, essentially we need a lay-by to park in. [...]

By |2022-11-28T17:30:45+00:00April 14th, 2021||

Which platforms does the i-Form Solution Employ?

We originally established the business to build the inner leaf of the superstructure from oversite right up to wall plate level and then pitch the roof structure, including the installation of the intermediate floors. However, as the building process becomes increasingly complex, we now find ourselves invariably undertaking the whole of the structural envelope, including the external leaf, [...]

By |2021-04-14T11:02:18+00:00April 2nd, 2019||

How quickly can MFS erect the masonry frame?

Essentially, we can build a typical pair of semis from oversite to watertight in 10 working days; and depending on the scale of the project and the desired handover rate, we can complete a pair of units every five working days thereafter. After that, it is just a question of adjusting the resource levels.

By |2021-04-12T14:25:24+00:00April 2nd, 2019||

How expensive is thin joint Construction?

In a recent study undertaken by Calford Seaden, it was concluded that the thin joint blockwork solution at Code Level 3 was 8% cheaper than either the equivalent timber frame or SIPS panel solution. We would further argue that when adopted as part of an integrated design solution, at Code Level 4 the savings or benefits are even [...]

By |2019-04-02T09:36:50+00:00April 2nd, 2019||

What strength blocks are used for thin joint construction?

Thin joint blocks are manufactured in all of the standard aircrete block strengths 2.80 N/mm2 Solar, 3.60 N/mm2 Standard and 7.30 N/mm2 Hi Seven, together with a few 10.30 N/mm2 Hi Tens. The principal difference is the accuracy and format of blocks. We tend to specify the Jumbo Plus format, which is 610mm x 270mm and manufactured to [...]

By |2019-04-02T09:35:04+00:00April 2nd, 2019||

Can MFS meet the latest Code for Sustainable Homes?

Yes, thin joint blockwork is recognised as a Modern Method of Construction and is widely adopted to meet both Code Level 3 and Code Level 4 of the CfSH (Code for Sustainable Homes). It can also be adopted for PassivHaus construction; in fact it makes an ideal structure because of its thermal mass properties.

By |2019-04-02T09:33:04+00:00April 2nd, 2019||

How does the MFS i-Form Solution® compare to RC Frame?

Independent industry experts recently concluded that the MFS i-Form Solution® is quicker, cheaper and uses significantly less labour than traditional RC Frame construction. We were asked to be part of a Cost / Benefit analysis conducted by a leading UK Developer & Main Contractor and two top London QS practices. They were tasked with evaluating and comparing various MMC solutions [...]

By |2022-10-05T17:46:11+00:00April 2nd, 2019||

Do MFS undertake BIM Compliant Design?

Yes, we now consider every project on its own merits and offer to take Design Responsibility delivering fully BIM Compliant Designs for the whole of the Structural Envelope with Design Warranty. That way we are able to rationalise our approach and provide the client with the comfort of a ‘tried and tested’ solution with a single point of [...]

By |2021-04-14T11:12:46+00:00January 30th, 2019||
Go to Top